MOUNTING ORDER:

1 assemble the adapter mount (do not set the needles-pins)

2 Insert two LOWER needles-pins about 1/5 of their length into the hole of the bracket, so that the needle point protrudes from the bracket by about 1-2 cm.

3 while holding the inserted needles, press the adapter firmly against a soft surface

4 keeping the adapter pressed, push the lower pins all the way in

5 alternately insert 2 upper needles into each bracket. insert the needle to its full depth until it stops with the ball-shaped head in the bracket

6 install scratching lath pad. attach and insert the protruding screw heads of scratching lath pad into the corresponding upper and lower holes of the adapter,

7 Press the scratching lath pad firmly against the adapter and slide it down until it stops

8 so, adapter ready for use

all models are symmetrical and have no top, bottom, left or right mounting side