MOUNTING ORDER:

1 assemble adapter mount (do not tighten the brackets tightly so that they slide)

2 slide all brackets of any one vertical side as far as possible to the edge of the universal platform, and fix them with the fastening screw so that they do not move

3 slightly tilting the adapter, rest against the edge of the protrusion of the attached surface with the entire side of the movable brackets, and pulling the adapter platform in the opposite direction, stretch the springs, place the adapter flat against the protrusion, engaging the fixed brackets with the side of the protrusion

4 Place the adapter flat against the protrusion, and insert the fixed brackets into engagement with the side of the protrusion

5 loosen the fixed bracket screws slightly so that the platform can be leveled

6 position the adapter platform according to the required need.

7 fix all screws. Tighten the screws lightly

8 set the scratching lath pad, for which attach and insert the protruding heads of the lath pad screws into the corresponding upper and lower holes of the adapter platform brackets

9 Press the bar firmly against the adapter platform and slide it down until it stops

10 adapter ready for use

all models are symmetrical and have no top, bottom, left or right mounting side